Question 1

What sizes do tablecloths come in?

Accepted Answer

Tablecloths come in a range of sizes to accommodate different table dimensions and shapes. The most common sizes include:

1. Square tablecloths: These typically measure between 52x52 inches, 70x70 inches, and 90x90 inches.

2. Round tablecloths: These can range from 70 to 136 inches in diameter.

3. Rectangular tablecloths: These are commonly available in sizes such as 52x70 inches, 60x102 inches, 60x126 inches, 72x120 inches, 90x132 inches, and 90x156 inches, .

4. Oval tablecloths: These are usually available in sizes like 60x84 inches and 60x102 inches.

It's important to note that the tablecloth size you choose should not only match the shape of your table, but also its size. Ideally, the tablecloth should hang down between 6 to 8 inches from the edge of the table. However, for more formal events, a tablecloth that reaches the floor may be more appropriate. To determine the right size of the tablecloth, you should measure the dimensions of your table and consider the desired drop length.

Question 2

How much should a tablecloth overhang the table?

Accepted Answer

The overhang of a tablecloth, also known as a drop, should typically be between 6 to 8 inches from the edge of the table. This is considered the standard in event planning as it provides an elegant appearance without obstructing guests' legs. However, for more formal events such as weddings or banquets, a floor-length drop, which is typically 29 to 30 inches, is often preferred. It's important to measure your table dimensions accurately to ensure you select the right tablecloth size. Remember, the length of the overhang can greatly influence the overall look and feel of your event.

Question 3

How much bigger should a tablecloth be than the table?

Accepted Answer

When selecting a tablecloth, it's crucial to consider the size of your table and the desired drop length. The drop is the part of the tablecloth that hangs over the edge of the table. Standard drop length for a casual setting is typically between 6 to 8 inches, while for more formal occasions, a drop length reaching to the floor, which is usually 30 inches, is preferred. Therefore, to determine the size of the tablecloth you should purchase, measure the length and width of your table and add twice the desired drop length to each measurement. For instance, if your table measures 60 inches long and 30 inches wide, and you want a drop of 8 inches, your tablecloth should be 76 inches long (60 + 8*2) and 46 inches wide (30 + 8*2). This ensures that your tablecloth will be appropriately sized for your table and occasion.

Question 4

What size do rectangle tablecloths come in?

Accepted Answer

Rectangle tablecloths come in a variety of sizes to suit different table dimensions. The most common sizes include 54x96 inches, 60x126 inches, 70x120 inches, and 90x132 inches. However, custom sizes can also be made available depending on the specific requirements of your event. The size of the tablecloth you choose should ideally allow for a drop of 6 to 12 inches on all sides of the table. It's important to measure your table accurately to ensure you select the right tablecloth size, which contributes to the overall aesthetic of your event.

Question 5

How do I clean and care for tablecloths?

Accepted Answer

Cleaning and caring for tablecloths is a simple process that can help extend their lifespan and keep them looking fresh and elegant for every event. The first step is to remove any loose particles from the tablecloth by shaking it out. If there are any stains, it's important to treat them as soon as possible. You can often use a mild detergent or a specialized stain remover, but always follow the instructions on the product and the care label on the tablecloth.

When it comes to washing, most tablecloths can be machine washed on a gentle cycle with cold water. However, delicate materials like lace or silk might require hand washing or professional cleaning. It's always best to check the care label for specific instructions.

After washing, avoid wringing the tablecloth as it can cause wrinkles and damage the fabric. Instead, allow it to drip dry or tumble dry on a low setting if the care label permits.

Ironing is another key part of caring for tablecloths. Most tablecloths benefit from being ironed while they're still slightly damp. Use a low heat setting for delicate fabrics and a higher one for cotton or linen. Ironing helps to remove any remaining wrinkles and gives the tablecloth a crisp, clean look.

Finally, when not in use, tablecloths should be stored in a cool, dry place. Folding them neatly can help prevent wrinkles and creases, while keeping them away from direct sunlight can prevent fading. By following these steps, you can ensure your tablecloths remain in top condition for your next event.

Question 6

What materials are tablecloths made of?

Accepted Answer

Tablecloths are made from a variety of materials, each offering its own unique aesthetic and functional benefits. Some of the most common materials used in the production of tablecloths include cotton, linen, polyester, and vinyl.

Cotton tablecloths are often favored for their natural, soft feel and high absorbency, making them ideal for formal dining occasions. Linen, on the other hand, is a luxurious fabric that is known for its durability and elegance, often used in high-end events or restaurants.

Polyester tablecloths are popular due to their resistance to staining and wrinkling, as well as their affordability. They are often used in casual dining settings or for events that require a large number of tablecloths, such as weddings or conferences.

Vinyl tablecloths, meanwhile, are best known for their practicality. They are water and stain-resistant, easy to clean, and ideal for outdoor events or family-friendly dining experiences where spills may be a common occurrence.

In addition to these materials, tablecloths can also be made from blends of different fabrics, or feature additional elements such as lace or sequin detailing for added decorative effect. The choice of tablecloth material largely depends on the nature of the event, the desired aesthetic, and the specific functional requirements.

Question 7

How much drop do I add to a tablecloth?

Accepted Answer

The amount of drop to add to a tablecloth primarily depends on the type of event and the look you want to achieve. Generally, a casual event may require a shorter drop, about 6 to 8 inches from the edge of the table. For more formal events, a longer tablecloth drop is preferred, often to the floor, which is typically 29 to 30 inches for standard tables. Therefore, when determining the size of your tablecloth, measure the dimensions of your table and add twice the desired drop length to both the length and width. For example, if you have a rectangular table that is 72 inches long and 30 inches wide, and you want a drop that goes to the floor (let's say 30 inches), you would need a tablecloth that is 132 inches long (72 + 30*2) and 90 inches wide (30 + 30*2). Remember, the final choice on tablecloth drop length should reflect the desired aesthetic and formality of your event.

Question 8

How many inches should a tablecloth hang over?

Accepted Answer

The length a tablecloth should hang over the edge of a table, also known as the drop length, largely depends on the type of event and the desired aesthetic. However, the standard drop length for a casual event is usually between 6 to 8 inches from the edge of the table. For more formal events, the tablecloth traditionally goes all the way to the floor, which is typically a 29 to 30 inch drop. Remember, the drop length is determined by measuring from the table's surface to where you want the tablecloth to end. Ultimately, the choice of drop length should complement the overall style and theme of your event.

Question 9

How do you secure a tablecloth to a table?

Accepted Answer

Securing a tablecloth to a table can be done in several ways to ensure it stays in place, regardless of wind or movement. One of the most common methods is using tablecloth clips. These are small, usually plastic or metal clips that attach to the corners or sides of the table, holding the tablecloth in place. They are discreet and won't interfere with the overall look of your table setting.

Another method is using a tablecloth weight. These are small, decorative items that you attach to the corners of the tablecloth. They add a touch of style while keeping the tablecloth grounded.

You can also use a table pad or a non-slip underlay. This is a layer that goes between the table and the tablecloth. It provides friction to prevent the tablecloth from sliding around.

Alternatively, if the tablecloth is for a one-time event and you don't mind altering it, you could use Velcro strips. Attach one side of the Velcro to the table edge and the other to the tablecloth. This will secure the tablecloth firmly to the table, but it does require some preparation.

Lastly, another simple method is to use double-sided tape. This can be placed on the edges of the table where the tablecloth will sit. The tape will hold the tablecloth in place, but be aware that it might leave a residue on the table or tablecloth.

Remember, the method you choose will depend on the type of event, the location (indoor or outdoor), and the type of table and tablecloth you are using.

Question 10

What size tablecloth do I need for a 8 ft rectangular table?

Accepted Answer

The size of the tablecloth you need for an 8 ft rectangular table largely depends on the desired drop length, which is the length of the tablecloth that hangs over the edge of the table. A standard tablecloth drop is between 6 to 8 inches for casual settings, and up to 30 inches for more formal events. An 8 ft rectangular table is typically 96 inches long and 30 inches wide.

For a casual setting, if you want a 6-inch drop, you should look for a tablecloth that measures approximately 108 inches in length (96 inches for the table length plus 6 inches drop on each end) and 42 inches in width (30 inches for the table width plus 6 inches drop on each side).

For a formal setting, if you prefer a floor-length drop of 30 inches, you'll need a tablecloth that is approximately 156 inches long (96 inches for the table length plus 30 inches drop on each end) and 90 inches wide (30 inches for the table width plus 30 inches drop on each side).

Remember to always measure your table before purchasing a tablecloth to ensure a proper fit.

Question 11

How do you fit a tablecloth to a table?

Accepted Answer

Fitting a tablecloth to a table requires a few simple steps. First, you need to measure the length and width of your table. This is crucial to ensure that the tablecloth you choose will adequately cover your table. Once you have these measurements, you can then select a tablecloth that fits. Ideally, the tablecloth should hang down about 6 to 8 inches from the edge of the table on all sides, which is considered the standard drop length. If you're looking for a more formal look, you might opt for a tablecloth that reaches the floor.

When placing the tablecloth on the table, ensure it's centered so that it hangs evenly on all sides. If the tablecloth is too large, you can create neat folds at the corners to make it fit better. Conversely, if it's too small, it's better to get a larger size to ensure proper coverage.

Remember, the material of the tablecloth can also affect how it fits on the table. Some materials, like linen or cotton, may shrink slightly when washed, so take this into account when choosing the size. Others, like polyester or vinyl, are more resistant to shrinking.

In conclusion, fitting a tablecloth to a table involves measuring your table, selecting the right size and material of tablecloth, and properly placing it on the table for an even drop on all sides.

Question 12

How do I choose the right tablecloth size?

Accepted Answer

Choosing the right tablecloth size requires a few key considerations. Firstly, you need to measure the dimensions of your table. This includes the length, width, and height. It's important to remember that tablecloths are not just about covering the top of the table, but also about how much they hang off the edges, known as the 'drop'.

A casual setting usually has a drop of 6 to 8 inches, while a more formal setting might have a drop of 10 to 12 inches or even to the floor. For instance, if you have a rectangular table that is 72 inches long and 30 inches wide, and you want a drop of 10 inches, your tablecloth should be 92 inches long (72 inches + 10 inches drop on each end) and 50 inches wide (30 inches + 10 inches drop on each side).

Secondly, consider the shape of your table. Rectangular or oval tables typically require rectangular tablecloths, while round or square tables require round or square tablecloths.

Lastly, think about the material and design of the tablecloth. It should complement the overall theme and decor of your event. By taking into account these factors, you can select the right tablecloth size for your event.

Question 13

What are standard sizes for rectangular tablecloths?

Accepted Answer

Rectangular tablecloths come in a variety of sizes to fit different table dimensions. The standard sizes typically range from 50x120 inches, 60x102 inches, 70x120 inches, to 90x156 inches. The size you choose depends on the length and width of your table as well as the desired drop length, which is the amount of cloth that hangs over the edge of the table. For casual dining, a drop of 6-8 inches is usually preferred, while for more formal occasions, a drop of 10-15 inches or even to the floor might be more appropriate. Therefore, when selecting a tablecloth, it's essential to measure your table and consider the occasion for which you're using the tablecloth.

Question 14

How much extra tablecloth do I need?

Accepted Answer

When determining the amount of extra tablecloth you need, you must consider the length of the table's overhang, also known as the drop. The standard drop for a formal event is typically between 10 to 12 inches, but it can be more or less depending on the event's formality and personal preference. To calculate the total length of the tablecloth, add twice the desired drop to both the length and the width of the table. For instance, if your table measures 60 inches long by 30 inches wide and you want a 10-inch drop, you would need a tablecloth that is 80 inches long and 50 inches wide. Remember, the size of the tablecloth can greatly influence the overall aesthetic of your event, so choose wisely.

Question 15

What are tablecloths?

Accepted Answer

Tablecloths are pieces of cloth used to cover tables. They serve both a functional and aesthetic purpose. Functionally, they protect the table from scratches, spills, and stains, making cleanup easier. Aesthetically, tablecloths add to the overall décor of a room or event setting, creating a more polished and cohesive look. They come in various sizes, shapes, and materials, such as cotton, linen, silk, or synthetic fabrics, to fit different types of tables and occasions. For instance, a formal event might call for a more elegant, perhaps embroidered or lace tablecloth, while a casual picnic might require a simple, washable, and durable tablecloth. Additionally, tablecloths can be used to set the tone or theme of an event, with colors and patterns chosen to match other elements of the décor.

Question 16

How big of a tablecloth do I need for a 8 foot rectangular table?

Accepted Answer

When choosing a tablecloth for an 8-foot rectangular table, it's crucial to consider both the length and width of the table, as well as the desired drop length, which is how much tablecloth hangs over the edge of the table. Typically, a drop length of 6 to 8 inches is considered casual, while a drop length of 15 inches or more is viewed as formal.

For example, if you have an 8-foot (or 96 inches) rectangular table and you want a casual drop length of 8 inches, you would add 16 inches (8 inches on each side) to both the length and the width of your table. If your table is 30 inches wide, this would mean you need a tablecloth that is 112 inches long (96 + 16) and 46 inches wide (30 + 16).

For a more formal setting with a drop length of 15 inches, add 30 inches to both the length and the width of your table. In this case, you would need a tablecloth that is 126 inches long (96 + 30) and 60 inches wide (30 + 30).

Remember, the measurements of the table do not always correspond exactly to the size of the tablecloth you can buy. You may need to round up to the nearest size available. Always measure your table before purchasing a tablecloth to ensure a proper fit.

Tablecloths

120" Scuba Round Tablecloth

120" Premium Polyester Round Tablecloth

90"x156" Rounded Corners Polyester Rectangle Tablecloth

120" Polyester Round Tablecloth

Polyester Round Tablecloth 120" White with Pink French Toile Pattern - Sophisticated Table Cover for Chic Weddings & Events

90"x156" Premium Polyester Rectangle Tablecloth

120" Velvet Round Tablecloth

90"x132" Rounded Corners Polyester Rectangle Tablecloth

60"x102" Premium Polyester Rectangle Tablecloth

60"x126" Premium Polyester Rectangle Tablecloth

90"x132" Polyester Rectangle Tablecloth

132" Polyester Round Tablecloth

90"x156" Scuba Rectangle Tablecloth

120" Big Payette Sequin Round Tablecloth

108" Polyester Round Tablecloth

120" Satin Round Tablecloth

90" Polyester Round Tablecloth

90"x132" Leaf Petal Taffeta Rectangle Tablecloth

120" Gold Foil Geometric Polyester Round Tablecloth

132" Scuba Round Tablecloth

90"x132" Big Payette Sequin Rectangle Tablecloth

120" Lamour Satin Round Tablecloth

108" Premium Polyester Round Tablecloth

90"x132" Scuba Rectangle Tablecloth

60"x102" Scuba Rectangle Tablecloth

90"x156" Leaf Embroidered Tulle Rectangle Tablecloth

41-50 Gallons Stretch Spandex Round Trash Bin Container Cover

4ft Fitted Polyester Rectangle Tablecloth

70" Polyester Round Tablecloth

120" Checkered Polyester Round Tablecloth

70"x70" Checkered Polyester Square Tablecloth

90"x156" Fringe Shag Polyester Rectangle Tablecloth

6ft Glow Neon Spandex Fitted Tablecloth

90"x156" Slubby Textured Seamless Rectangle Tablecloth

120" Faux Burlap Jute Round Tablecloth

72"x120" Fire Retardant Premium Polyester Rectangle Tablecloth

5ft Stretch Spandex Round Tablecloth

24-40 Gallons Stretch Spandex Round Trash Bin Container Cover

6ft Open Back Fitted Polyester Rectangle Tablecloth

8ft Open Back Fitted Polyester Rectangle Tablecloth

60"x102" Faux Burlap Jute Rectangle Tablecloth

8ft Fire Retardant Fitted Rectangular Tablecloth Premium Polyester

6ft Stretch Spandex Round Tablecloth

Tall Narrow Fitted Polyester Rectangle Tablecloth

6ft Fire Retardant Fitted Rectangular Tablecloth Premium Polyester

Narrow Fitted Polyester Rectangle Tablecloth

6ft Curved Open Back Stretch Spandex Rectangular Table Cover

132" Fire Retardant Premium Polyester Round Tablecloth

90"x156" Faux Burlap Jute Rectangle Tablecloth

120" Fire Retardant Premium Polyester Round Tablecloth

120" Round 100% Cotton Tablecloth

108" Faux Burlap Jute Round Tablecloth

60"x126" Fire Retardant Premium Polyester Rectangle Tablecloth

90"x132" Faux Burlap Jute Rectangle Tablecloth

108" Fire Retardant Premium Polyester Round Tablecloth

90" Fire Retardant Premium Polyester Round Tablecloth

90"x132" Fire Retardant Premium Polyester Rectangle Tablecloth

60"x102" Fire Retardant Premium Polyester Rectangle Tablecloth

90" Faux Burlap Jute Round Tablecloth

90"x156" Fire Retardant Premium Polyester Rectangle Tablecloth

Popular High-Quality Tablecloth Fabrics

Polyester Tablecloths

Satin Tablecloths

Scuba Tablecloths

Sequin Tablecloths

Taffeta Tablecloths

Velvet Tablecloths

Burlap Tablecloths

Lace Tablecloths

Spandex Tablecloths

Different Tablecloth Shapes and Sizes

Rectangular Tablecloths

Round Tablecloths

Square Tablecloths

How to Choose the Perfect Table Linens for Your Event

Why Choose Efavormart Tablecloths for Your Event Needs?

FAQ Section

1. How to choose the right tablecloth size?

2. What’s the best tablecloth material for outdoor events?